It is the connection methods that make the difference between the two types. In the DSL/ADSL model the connection to the linksys wireless router setup is done through the use of a telephone modem, however, the username and the password that are used for the connection are provided by the internet service providers. While in the standard router setup the connection is done directly through the modem of the cable.

It is also important that one knows some of the ports that used in the linksys wireless router setup. One of the important ports that are required for that connection is called the WAN port. It is this port that is used to connect to the cable modem through the usual ethernet cable. When one is doing the linksys wireless router setup through DSL/ADSL, this port may be smaller among all the ports that are seen in its section. There are four ports that are in the red rectangular and they are called the LAN ports. What these ports do is that they are used to connect devices to the computer through the use of a cable. One does not need to become conversant with all those ports except when he is connecting to multiple routers. For the connection of DSL router you can make use of the wan port which you connect to the ethernet port through cable.

When you access the router that would use for the linksys wireless router setup the first thing that you need to know is that it may require configuration. However it is not in all cases that the configuration is necessary because some of the routers that are purchased are already configured by the internet service providers. The IP of the internet service providers are used to configure it and most of the configurations are done using this common and popular ip address which is 192.168.1.1. What is required for the router with this IP to get connected is that you have to do the connection with an IP that should be in the same range with the computer which is used for this linksys wireless router setup. Setting up your computer to have the same range of IP with the router is not difficult. The process is simple what you do is to click on start then control panel and network connection. Then you right click the local area connection and select properties. You click twice on TCP/IP and the box which says use the following IP address. What you do next is to configure the IP address to be in the same range with your router; you can make it to be 192.168.1.20. You can also make the subnet mask to read 255.255.255.0. You may not bother yourself with the other settings.

This tab is very unique in the linksys wireless router setup because it is this tab that allows for the internet connection to be feasible. It allows for connection to be made to the DDNS, DHCP, and for the MAC services and it helps for advanced routing too.

The other important tab that is indispensable in the linksys wireless router setup is the wireless tab. This tab is also very useful because with that it becomes possible to configure the settings to both the basic and the advanced stages, with this tab it becomes possible to set the security for the wireless settings as well as the filtering for the wireless MAC. The other tab that is worth mentioning is the tab that is called the security tab. As the name already suggests it is all about the security of the whole linksys wireless router setup. With this tab it becomes possible for the firewall of the linksys router as well the VPN feature to be setup. It provides the security so that people cannot break in to the router at least without resistant.

The other important tab that are required in setting the linksys wireless router setup is the tab that is called the access restriction tab. This is also helpful in terms of security because it monitors and restricts both the outbound and the inbound traffic especially when the router is connected to the internet. It is not this tab does that but it is used to control the inbound and the outbound traffics. It is useful in setting the HTTP, FTP and POP, the internet hosts and a lot of other things on the linksys wireless router setup.

The other useful tab in the web based linksys wireless setup process is the application and gaming tab. With this it is possible for one to do a lot of things in the internet such as the publishing of the certain applications to the internet network as well as the setting up of such features and applications as DMZ. What this does is that it offers protection especially when one is making use of the internet. In the same way the administrative tab is very useful in the web based linksys wireless router setup process because it makes it possible to do a lot of things. Through it one is able to make use of the other tabs that are contained in the interface. The main thing it does is that it grants one the access to the router setup processes itself. Without it nothing can be done.

When one purchases any of these routers it is recommended that before the linksys wireless router setup begins properly one should take time to read the accompanying manuals so as to know the requirements for the setup and configurations. Reading it will make it possible for one to understand the features and how they can be used in the linksys wireless router setup and configuration processes. Getting access to the router is easy these days. Often the manual do come with the router when it is purchased. Even if one is not certain it is recommended that one visits the vendor’s website and download the manual free.

The reason why it is advisable to make use of the manual is because the producers always provided the step by step guide for the configuration and linksys wireless router setup. It is good that one go through the manual to know where to put what and where to connect what. The manual also do come with the wizard that will help out in the configuration and linksys wireless router setup processes. Moreover it is recommended that one visits the vendor’s website and register with them why this is necessary is because if one registers with them he will be getting updates and other necessary information about the router as things change.

After you have done all that the next stage now becomes the linksys wireless router setup. The first thing that should be done is to open any of the web browsers of your preference such as the Opera, internet explorer, Netscape or any of the popular browsers. Then type the following web address: http://192.168.1.1. What you observe is the IP assigned to the router from the factory it was produced. This is also contained in the manual if you go through them. What you are required to do at this point of the linksys wireless router setup is to make the IP addresses to synchronize. Set the computer IP to a range that would not be different from the range of the router. In the same way both the net mask and the gateway IPs have to be adjusted to synchronize.

The following processes could be followed up in the linksys wireless router setup. The first step is to purchase the linksys router if one does not have it. The type and quality that one should buy entirely depends on the budget and the computing requirements.

The next stage in the linksys wireless router setup process becomes to attach the antenna that would be used for the linksys wireless network setup. It is further recommended that the router has to be placed at a convenient and central location but it has to be at a place where it will not be connected with any metal. Metal are not allowed near the router because it help in getting signals. The location of the router should at a distance that is equal to the client computers. This is the best way to ensure that there is a better connection.

The ethernet cable has to be plugged into the port that is provided in the router system that is called the internet port. Also the computer should be connected to the router by plugging the other ethernet cable to the ethernet port that is provided at the computer. The port to be used for the connection could be any port except of course the port that is labeled as WAN. After this the router can be plugged to the power source. After the connection to the power source you exercise patience just for few minutes to allow the light to begin to flash. When this happens it means that the router has finished booting. This normally takes just few minutes. Then you reboot the computer to enable it have access to the IP address to be given to the router through the DHCP that is the Dynamic Host Configuration protocol.

The other stage at the linksys wireless router setup process becomes to configure the router. To do this the web address http://192.168.1.1/ has to be typed again. The word admin has to be inserted as the username while the password has to be left blank when a pop up for that appears. After you connect to the internet and click the internet setup button. The connection type to be selected from the dropdown is the DHCP this is for the modems that uses cable and PPPoE for modems that use DSL. To be sure of options to choose you can consult with your ISP.

The first in the setup processes is plugging the wireless linksys wireless adapter to the source of power supply. It is advisable to allow for some few seconds for the system to be fully initialized before the ethernet cable is plugged to the same source of power supply. There are different types of plugging that must be done: the first as said earlier is plugging the ethernet cable into both power and the port in the router. The other ethernet cable would be plugged at the position provided for it at the laptop and at the other end of the ports which is labeled 1-4 on the same router. With that the computer is then set for both the linksys wireless router setup and the configuration as well.

The second stage of the linksys wireless router setup stage is the opening of the web browser. When the web browser is opened you type in this figure http://192.168.1.1 in that address bar. What will follow up is a window that would be requiring you to put your username and password. These are required for you to access the configuration page of the linksys wireless router setup. What you will use to fill up the spaces for the username and the password is the admin. After that the setup processes begins.

As part of the linksys wireless router setup you would be required to affect a change in the router name from the original or default to something that you will always remember, this is to prevent confusion on the part of the base station as regards your own setup. After that you save the setting and continue with the configuration processes. You will know when the settings become successful through the message that would be displayed.

The next stage is to click on the wireless tab which would be displayed at the top of the screen. Also you should change the name from its default or original value to a value that would be remembered by you. The wireless SSID option has to be disabled and saved afterwards. Continue the setup processes, when the setup processes is completed a dialogue will appear showing that the installation was successful. If the dialogue which shows that the setup was successful is not seen then the setup is not complete.

The next stage is to click on the wireless security which would be located at the top of that page. This option becomes necessary for you to fill to protect the linksys wireless router setup with your password. Select the WEP security from the drop down that would appear. From that you select 128 bits and 26 hex digits. The password to be selected should be between 6 to 8 characters. The linksys wireless router setup could not be harder than that.